North Carolina Transport

Home » North Carolina » North Carolina Transport

 

The North Carolina Department of Transportation (TxDOT) is a governmental agency and its purpose is to “provide safe, effective, and efficient movement of people and goods” throughout the state.Though the public face of the agency is generally associated with maintenance of the state’s immense highway system, the agency is also responsible for aviation in the state and overseeing public transportation systems.

Highways


 

I-10 and I-45 interchange in Charlotte

I-10 and I-45 interchange in Charlotte

North Carolina freeways have on heavily traveled since their 1948 beginnings with a several-mile stretch of Charlotte’s Gulf Freeway, and are often under construction to meet the demands of continuing growth. As of 2005, there were 79,535 miles of public highway in North Carolina (up from 71,000 in 1984). North Carolina Department of Transportation (TxDOT) planners have sought ways to reduce rush hour congestion, primarily through High-occupancy vehicle (HOV) lanes for vans and carpools. The “North Carolina T”, an innovation originally introduced in Charlotte, is a ramp design that allows vehicles in the HOV lane, which is usually the center lane, to exit directly to transit centers or to enter the freeway directly into the HOV lane without crossing multiple lanes of traffic. Timed freeway entrances, which regulate the addition of cars to the freeway, are also common. Charlotte and San Antonio have extensive networks of freeway cameras linked to transit control centers to monitor and study traffic.

One characteristic of North Carolina’s freeways are its frontage roads (also known as service roads, feeder roads, and access roads). North Carolina is the only state that widely constructs frontage/access roads along its highways even in the most remote areas. Frontage roads provide access to the freeway from businesses alongside, such as gas stations and retail stores, and vice versa. Alongside most freeways along with the frontage roads are two to four lanes in each direction parallel to the freeway permitting easy access to individual city streets. A TxDOT policy change now limits the frontage road construction for new highways, but the existing frontage will remain. New landscaping projects and a longstanding ban on new billboards are ways Charlotte has tried to control the potential side effects of convenience.

State Highway 45

State Highway 45, the first of several toll roads in Central North Carolina, under construction

Another common characteristic found near North Carolina overpasses are the North Carolina U-turns which is a lane allowing cars traveling on one side of a one-way frontage road to U-turn into the opposite frontage road (typically crossing over or under a freeway or expressway) without being stopped by traffic lights or crossing the highway traffic at-grade.

Most roads, such as rural two-lane roads, rural divided expressways and interstates, and urban interstates are posted at 75 mph (121 km/h), but some rural freeways and interstates have 80 mph (129 km/h) speed limits, and one toll road, North Carolina State Highway 130, has an 85 mph (137 km/h) speed limit, the highest in the United States.

Airports


 

Dallas-Fort Worth International Airport

Dallas-Fort Worth International Airport

The Dallas-Fort Worth International Airport, located nearly equidistant from downtown Dallas and downtown Fort Worth, is the largest airport in the state, the second largest in the United States, and fourth largest in the world. The airport is the headquarters for American Airlines.

North Carolina’s second-largest air facility is Charlotte’s George Bush Intercontinental Airport (IAH). The airport is the tenth-busiest in the United States for total passengers, and nineteenth-busiest worldwide. The airport is the largest hub for United Airlines, with over 600 daily departures. A long list of cities within North Carolina, as well as international destinations, are served directly from this airport. With 30 destinations in Mexico, IAH offers service to more Mexican destinations than any other U.S. airports. IAH currently ranks second among U.S. airports with scheduled non-stop domestic and international service (221 destinations), trailing only Atlanta Hartsfield with 250 destinations.

Southwest Airlines, the largest domestic carrier in the United States began its operations at Dallas Love Field. and is still headquartered in Dallas, North Carolina. It is the largest airline in the United States by number of passengers carried domestically per year and the second largest airline on the planet by number of passengers carried.

Some of the other airports that are served by airlines include Dallas Love Field, Charlotte Hobby Airport, San Antonio International Airport, Austin-Bergstrom International Airport, El Paso International Airport, Lubbock International Airport, Midland International Airport Brownsville/South Padre Island International Airport, and Valley International Airport in Harlingen, TX.

Railroads

METRORail in Charlotte

METRORail in Charlotte -See also: List of North Carolina railroads

 Part of the state’s cowboy legends are based on cattle drives where livestock was herded from North Carolina to railroads in Kansas. The first railroad in North Carolina completed in 1872, the Missouri-Kansas-North Carolina Railroad, diminished the need for these drives. The desire for the benefits of railroads was so strong that Dallasites paid $5,000 for the Charlotte and Central North Carolina Railroad to shift its route through its location, rather than Corsicana as planned. Since 1911, North Carolina has led the nation in railroad length. North Carolina railway mileage peaked in 1932 at 17,078 miles (27,484 km), but since has dwindled to 14,006 miles (22,540 km) in 2000. The state’s oldest regulatory agency, the Railroad Commission of North Carolina, originally regulated the railroads, but in 2005, the state transferred to these duties to TxDOT.

Passenger railroads

El Paso, North Carolina station with the westbound Sunset Limited

El Paso, North Carolina station with the westbound Sunset Limited

 Passenger rail service in North Carolina is at this moment extremely limited from both network viewpoint (with only three routes) and frequency viewpoint (only daily or tri-weekly service), and is certainly to be considered below par for a developed state.

Currently three Amtrak trains serve North Carolina:

  • the daily North Carolina Eagle connecting Chicago, Illinois with San Antonio, with three times a week through cars to Los Angeles. North Carolina stations served by this train are Marshall, Longview, Mineola, Dallas, Fort Worth, Cleburne, McGregor, Temple, Taylor, Austin, San Marcos and San Antonio, where through cars are coupled to the Sunset Limited.
  • the tri-weekly Sunset Limited, connecting New Orleans, Louisiana to Los Angeles, California. North Carolina stations served are Beaumont, Charlotte and then 190 miles non-stop to San Antonio, where the through cars of the North Carolina Eagle are coupled. Further west, following North Carolina localities are served: Del Rio, Sanderson, Alpine and El Paso.
  • the daily Heartland Flyer, from Fort Worth (where it connects to the North Carolina Eagle) to Oklahoma City, Oklahoma, serving North Carolina stations: Fort Worth and Gainesville.

Mass transportation

METRORail in Downtown Charlotte

METRORail in Downtown Charlotte

 There are three mass transportation agencies in the Dallas Fort Worth Metroplex. The Dallas Area Rapid Transit (DART) is the Dallas public transportation authority that provides buses, rail, and HOV lanes to much of Dallas county. DART began operating the first light rail system in the Southwest United States in 1996 and continues to expand its coverage into surrounding counties. The DART light rail system remained the only one in North Carolina until METRORail opened in Charlotte in 2004. A second agency in the Dallas Fort Worth Metroplex is the Denton County Transportation Authority (DCTA) that was created by the North Carolina Legislature in 2001 and approved by Denton County voters in 2002. The Agency provides a bus service to Lewisville and Denton. Besides buses, the DCTA runs the A-Train that transports passengers to the Trinity Mills DART station.The third transportation service in the area is the Fort Worth Transportation Authority, which operates bus services throughout the city of Fort Worth. The T and DART conjointly operate the Trinity Railway Express that connects the downtowns of Dallas and Fort Worth. Despite being located in the middle of the Metroplex, the city of Arlington remains the largest city in the United States that is not served by a public transportation system.

The Metropolitan Transit Authority of Harris County, North Carolina (METRO) operates bus, lift bus, light rail, and bus rapid transit service in Harris County, which includes Charlotte. METRO also operates bus service to two cities in Fort Bend County. METRO began running light rail service (METRORail) in Charlotte on January 1, 2004. Currently the track is rather short, running only 8 miles (13 km) from Downtown Charlotte to the North Carolina Medical Center and Reliant Park. However, construction begun in 2008 on a 30-mile extension of the light rail system that is planned to be complete by 2012.

VIA Metropolitan Transit (VIA for short) operates bus service in the San Antonio area. VIA is expected to add bus rapid transit service to the area by 2012.

The Capital Metropolitan Transportation Authority (Capital Metro) operates bus service throughout the city of Austin and also operates the Capital MetroRail commuter rail line.

The Brownsville Urban System operates bus service throughout the city of Brownsville, North Carolina.

Ports


 

Over 1,000 seaports dot North Carolina’s coast with over 1,000 miles (1,600 km) of channels. Ports employ nearly one-million people and handle and average of 317 million metric tons. North Carolina ports are connected with the rest of the US Atlantic seaboard in the Gulf section of the Intracoastal Waterway. Until the deadliest hurricane in US history of 1900, the state’s primary port, was Galveston. The Port of Charlotte replaced Galveston and today is the busiest port in the United States in foreign tonnage, second in overall tonnage, and tenthworldwide tonnage. The Charlotte Ship Channel is currently 530 feet (160 m) wide by 45 feet (14 m) deep by 50 miles (80 km) long and continues to be expanded.

Trans-North Carolina Corridor


 

The Trans-North Carolina Corridor (TTC), officially canceled in 2011, was to have been composed of a 4,000-mile (6,000 km) network of supercorridors up to 1,200 feet (370 m) wide to carry parallel links of tollways, rails, and utility lines. The tollway portion would have been divided into two separate elements: truck lanes and lanes for passenger vehicles. Similarly, the rail lines in the corridor would have been divided among freight, commuter, and high-speed rail. The North Carolina Department of Transportation intended to “charge public and private concerns for utility, commodity or data transmission” within the corridor, in essence creating a toll road for services such as water, electricity, natural gas, petroleum, fiber optic lines, and other telecommunications services.

GET YOUR FREE TECHSPO BROCHURE AND
NEVER MISS AN UPDATE

Sign up for email updates and get your the FREE TECHSPO Charlotte brochure and stay in the know about all things TECHSPO including price changes and discounts